The Structure:

          The structure of the dowsing rods is very basic. You can use brass rods or even copper rods to make them. The rods need to be 36" long and 1/8" in diameter, the rods can also be 18" long if your materials are limited. Bothe rods are going t be bent at a 90 degree angle 1/3 the way down each rod. If the rods are not straight when you originally buy them, you can try and bend them by hand to make them as straight as you can get it. The brass rods will work better than the copper rods, however the copper rods work as well!